Terminator Arnold Black Leather Jacket
This Terminator leather jacket is a short black biker jacket inspired by the T-800 that Arnold Schwarzenegger played in The Terminator (1984). It is made from 1.1-1.3 mm cowhide with a natural finish, an asymmetric YKK zip, snapped lapels and an antique silver buckle.
- Black cowhide, 1.1-1.3 mm, natural finish
- YKK asymmetric zip, snap lapels, silver buckle
- 4 outside pockets and 1 inside patch pocket
- Standard sizes or Custom Size
Terminator 1984 Black Leather Jacket
The first-film T-800 look
The original Terminator is the cold, direct version of the character, and the jacket suits it: short, black, built like a biker jacket and fastened across the chest at an angle. The off-center zip, flat lapels and silver buckle are the points that give it that outline. It is our own design inspired by that look and is not official or licensed merchandise.
Leather and construction
At 1.1-1.3 mm this is a substantial cowhide, thicker than the film jackets we cut in sheepskin or lambskin. It feels stiff at first and gets softer and creased in the usual places as you wear it. Every seam is hand-stitched, and the polyester lining sits inside unless you choose No Lining.
This one or Terminator 2
This is the page for the 1984 look. If you want the sequel version, the Terminator 2 black biker jacket is the one to open, and the construction facts are the same, so decide by the film you want to reference. For a general biker jacket without the film link, see the full range linked in the specifications.
Before you order
- Men's standard sizes run EU 42-60; use the size chart.
- The jacket is short, so choose Custom Size if you need extra sleeve or body length.
- Choose your lining option before you pay.

Terminator Arnold Black Leather Jacket 
terminator 1 leather jacket 
the terminator leather jacket 
Terminator Arnold Black Leather Jacket
Product Specifications
- Product Type: Men's short biker leather jacket
- Material: Black cowhide, 1.1-1.3 mm
- Leather Finish: Natural
- Lining: Polyester; or No Lining, Regular Lining, Sublimated Lining with your design
- Construction: Hand-stitched; short biker cut
- Closures: YKK asymmetric zip; snap buttons on the lapels; antique silver buckle
- Pockets: 4 outside (zip slash and chest); 1 inside open patch
- Options: Lining type; Order Instructions box
- Sizes: Men's EU 42-60 (US 32-50)
- Made to Measure: Yes: Custom Size, measurements sent after ordering
- Category: Terminator jackets for men
- Related: Terminator 2 black biker jacket
