Canada 
Brazil 
Germany 
France 
Italy 
Switzerland 
Sweden 
Spain 
Great Britain 
Norway 
Russia 
South Africa 
Japan 
New Zealand 
Australia 
These Jonathan Rea 2019 motorcycle race gloves take their look from his Kawasaki WSBK season. They come in black, red and white and are hand-stitched to order.
- 0.8-0.9 mm cowhide leather.
- TPU knuckle protector with air vents.
- Aramid (Kevlar) lining and Velcro wrist and cuff straps.
Jonathan Rea 2019 Motorcycle Race Gloves Features
- The gloves use 0.8-0.9 mm cowhide in black, red and white.
- A TPU knuckle protector shields the back of the hand.
- Air intakes and an exhaust port in the protector let air flow.
- TPU sliders on foam sit on the palm, thumb and fingers.
- Extra leather between the thumb and index finger adds grip.
- The palm and fingers are pre-curved to match your grip on the bars.
- Flexible knuckles let your hand close with ease.
- An aramid (Kevlar) lining sits inside the shell.
Fit, Closure & Sizing
- A Velcro wrist strap and a Velcro cuff hold the gloves in place.
- Seams are sewn with strong nylon thread.
- Sizes run from XS to 3XL. Check the size chart before you order.
- Leather Collection has made leather gear since 2009.
- For a newer team look, see the from the 2023 season.
Jonathan Rea Moto Racing Gloves WSBK 2019 
jonathan rea wsbk gloves cowhide race gloves 
Jonathan Rea Moto Racing Gloves WSBK 2019
Product Specifications
- Product Type: Racing gloves
- Category: WSBK Race Replica / Gloves
- Intended Use: Track days, sport riding, WSBK replica collecting
- Material: 0.8-0.9 mm cowhide leather, plain finish
- Construction: Hand-stitched, made to order; nylon thread seams; extra leather between thumb and index finger; pre-curved palm and fingers; flexible knuckles
- Lining: Aramid (Kevlar) lining
- Closure / Fit System: Velcro wrist strap; Velcro cuff closure
- Protection: TPU knuckle protector with air intakes and exhaust port; TPU palm, thumb and finger sliders on foam
- Style / Design Features: Black, red and white; inspired by Jonathan Rea's 2019 Kawasaki WSBK gloves
- Sizes: XS, S, M, L, XL, 2XL, 3XL
- Ideal For: WSBK fans and riders who want Jonathan Rea replica gloves with knuckle armor
- Brand: Leather Collection
- Explore Related Gear: Browse the range and the Kawasaki Racing Suit page.
FREQUENTLY ASKED QUESTIONS
The shell is 0.8-0.9 mm cowhide with a plain finish. Thin leather like this keeps a good feel on the controls. Extra leather sits between the thumb and index finger, where grip wears a glove first. Inside, an aramid (Kevlar) lining adds a second layer under the leather. The seams are sewn with strong nylon thread. The colors are black, red and white.
A hard TPU knuckle protector covers the back of the hand. It has air intakes and an exhaust port, so air can flow over your knuckles. TPU sliders on foam sit on the palm, thumb and fingers. They help the glove slide on the road surface instead of grabbing it. The knuckles are built to flex, so you can still close your hand on the grips.
The gloves come in XS, S, M, L, XL, 2XL and 3XL. Measure around your hand at the knuckles, without the thumb. Then compare the number with the size chart. Race gloves should feel snug, since the leather eases a little with use. The pre-curved fingers will feel tight when your hand is flat. That is normal, as they are shaped for gripping the bars.
Two straps hold them on. A Velcro strap closes at the wrist, and a Velcro cuff closes over the end of your jacket sleeve. Pull both tight before you ride. Then the glove cannot slip off your hand. No glove can stop every injury, so wear them with a jacket or suit that has armor too. Check the straps for wear from time to time.
Yes. The
page groups the gloves inspired by him, so you can compare seasons. For a Kawasaki road look, see the
. Each pair is hand-stitched to order in cowhide. Check the knuckle armor and lining on each page, since they differ from glove to glove.
Related Products
Check items to add to the cart or
