These brown leather driving gloves for men are cut from 0.8-0.9 mm cowhide. They are unlined, so you feel the wheel.
- Vent holes, knuckle holes and vented panels let air in.
- An antique brass snap closes the wrist.
- Also comes in black, coffee and tan.
Construction Details
- These brown leather driving gloves are cut from 0.8-0.9 mm cowhide with a plain finish.
- They have no lining, so the leather sits close to your skin. You get a good feel of the wheel.
- Vent holes, knuckle holes and vented panels let air move on long drives.
- An antique brass snap button closes the wrist.
- The gloves have a standard fit, not a race fit.
Colors & Sizes
- Colors: black, brown, coffee and tan.
- Sizes run from XS to 3XL. See the size chart.
- Leather Collection has made leather gear since 2009. Each pair is hand-stitched to order.
- For more styles, see the mens leather gloves range.

Brown Leather Driving Gloves 
leather driving gloves 
leather driving gloves men 
Brown Leather Driving Gloves
Product Specifications
- Product Type: Driving Gloves
- Category: Gloves, For Men
- Intended Use: Driving, everyday wear
- Material: 0.8-0.9 mm cowhide leather, plain finish
- Construction: Hand-stitched, made to order; unlined
- Closure / Fit System: Antique brass snap button at the wrist; standard fit
- Ventilation: Vent holes, knuckle holes and vented panels
- Style / Design Features: Black, brown, coffee or tan
- Sizes: XS to 3XL
- Brand: Leather Collection
FREQUENTLY ASKED QUESTIONS
They are made of cowhide that is 0.8-0.9 mm thick. That is thin enough to feel the wheel and the gear stick. The leather has a plain finish and softens as you wear it. There is no lining inside, so the leather shapes to your hands over time. You can pick black, brown, coffee or tan.
The holes let air in. There are vent holes on the back of the hand and holes over the knuckles. Vented panels add more airflow. This keeps your hands cooler on long drives and on warm days. The knuckle holes also let your fingers bend with less pull on the leather.
An antique brass snap button closes the wrist. Pull the glove on, then press the snap shut. It holds the glove in place while you drive. To take the glove off, pull the snap open. The brass has an aged look that suits the brown leather. There are no straps or zippers to adjust.
Measure around your palm, just below the knuckles, with a soft tape. Then match the number to the size chart. Sizes run from XS to 3XL. Driving gloves should feel close but not tight, since the unlined leather will give a little. If you sit between two sizes, the customer service page can help you choose.
Wipe them with a dry or slightly damp cloth after use. Let them dry at room temperature, away from heaters and strong sun. Rub in a little leather conditioner every few months to keep them soft. Do not put them in a washing machine. Because there is no lining, they dry fast. For more tips, see the leather care instructions.

