Brad Binder racing boots in this range are inspired by his 2024 MotoGP season with KTM. The boots are black and cut from 1.2-1.3 mm cowhide. Each pair is hand-stitched and made to order. For suits and jackets, see the wider Brad Binder replica gear
range.
Brad Binder Racing Boots Replica Race Boots Made to Order
These race boots take their look from the boots Brad Binder wore with KTM in the 2024 MotoGP season. The base color is black. See the full design on the Brad Binder Moto Leather Shoes
page.
Each boot is cut from 1.2-1.3 mm cowhide. Ankle and shin protectors guard the lower leg. The heel and toe are reinforced, and the toe sliders can be replaced. The rubber sole resists slips and oil. A YKK zip closes the boot, and a leather pad covers the gear-change side.
Sizes run EU 36 to 46 (US 4.5 to 12) in a standard fit. The boots are not cut to custom measurements. Each pair is hand-stitched and made to order.
Protection and Sizing
Protection - ankle and shin protectors, a reinforced heel and toe, toe sliders you can replace and a pad on the gear-change side.
Sole - a rubber sole that resists slips and oil, with grip zones for track and road.
Sizing - EU 36 to 46 (US 4.5 to 12), standard fit. Measure your foot length and check the size chart before you order.
Buying Guidance
How do I choose a size? Measure your foot at home and compare it with the Size Guide. Where can I get help? The customer service page answers sizing and order questions.
The boots take their look from the 2024 MotoGP season, when Brad Binder rode for KTM. The base color is black. The product photos show the boot from several sides, so you can see where each panel sits. The same boot is offered for men and women. Check the photos before you order, since each pair is cut and hand-stitched for you after you order.
The boots run EU 36 to 46, which is US 4.5 to 12, in a standard fit. There is no custom size for boots. Measure your foot length in centimeters and compare it with the Size Guide. Do not go only by your sneaker size. Race boots fit closer at the ankle and heel. If you are between two sizes, ask through the customer service page before you order.
Each boot is cut from 1.2-1.3 mm cowhide. Protectors sit at the ankle and shin. The heel and toe are reinforced, and the toe sliders can be swapped when they wear down. A leather pad covers the gear-change side, so the shifter does not scuff the boot. The rubber sole resists slips and oil. A YKK zip runs up the boot to close it.
Yes. The rubber sole has grip zones for both track and road surfaces, and it resists oil on the ground. The zip makes the boots quick to put on and take off. Many riders wear them with a race suit or with leather pants. The toe sliders can be replaced, so wear from track days does not mean a new pair. Care for the leather like any riding boot.
A replica leather race suit inspired by Jorge Lorenzo and the Ducati Team of the 2018 MotoGP season. The guide covers his three wins and his move to Honda,...
A guide to the Johann Zarco Red Bull KTM 2019 replica jacket. It covers his short stint with the factory team, what materials and protective features...
A guide to Leather Collection's replica suit inspired by Jonathan Rea and the Kawasaki Racing Team in the 2021 World Superbike season. It covers the cowhide...