Canada 
Brazil 
Germany 
France 
Italy 
Switzerland 
Sweden 
Spain 
Great Britain 
Norway 
Russia 
South Africa 
Japan 
New Zealand 
Australia 
Valentino Rossi, nicknamed "the Doctor", won nine Grand Prix world titles, and his helmet and gear designs became as recognizable as his results. His helmet designs use a Sun and Moon (Soleluna) motif, and the replica gloves described here follow his 2019 Yamaha colors, listed as black and fluorescent yellow.
Key Takeaways
- The gloves are a replica inspired by Valentino Rossi's 2019 MotoGP design, not an official or licensed product.
- A racing glove balances abrasion resistance with enough thinness to feel the throttle and brake lever.
- The product page lists a carbon-reinforced metal knuckle protector, TPU-backed polyfoam sliders and Velcro closures; it states no EN 13594 level.
- Made-to-measure sizing lets knuckle protection and sliders line up with the rider's own joints.
The from Leather Collection are made for fans and track-day riders who want that design. For a closer look at the wider Rossi range, the show another take on his colors, and the follow the factory Yamaha palette.
What a Racing Glove Has to Do
A racing glove has to be thin enough to give feel for the throttle and brake lever, yet tough enough to survive a slide on abrasive asphalt. The two goals pull in opposite directions, and glove design is largely about balancing them.
Materials
Cowhide and goatskin: Cowhide is the common choice for the main body because of its abrasion resistance. Goatskin is thinner and is often used on the palm for better feel of the bars.
Reinforced palm and fingers: Extra layers or grip overlays on the palm and index finger improve control and add wear resistance where the glove contacts the grips.
Protection Features to Look For
In a crash the hand is usually the first contact point with the road. Racing gloves therefore combine several protective elements, and the details are worth checking on any pair.
Knuckles, Palm and Cuff
Knuckle protector: The product page lists a carbon-reinforced metal knuckle protector.
Sliders: The page lists TPU-backed polyfoam sliders at the palm, thumb and fingers.
Closures: The page lists a Velcro strap wrist closure and Velcro cuffs, which are the parts that help keep a glove on the hand.
Finger bridge: Some racing gloves add a link between the ring and little fingers; the product page does not list one, so check before assuming it is fitted.
Standards give a neutral reference for these features. EN 13594 for motorcycle gloves covers seam strength, cut and tear resistance, abrasion and glove retention, as explained by SATRA. A pair should only be described as meeting it when its label or product documentation says so, and the product page for these gloves states no EN 13594 level.
Ergonomics for the Racing Tuck
A stiff glove causes hand fatigue. The are listed with a pre-curved palm and fingers and Velcro wrist and cuff closures. Stretch panels or perforation are not listed, so ask the maker before relying on them.
The VR46 Look
The design draws on the Sun and Moon motif that appears on Rossi's helmet, with black and fluorescent yellow Yamaha racing colors as listed on the product page.
Why Made-to-Measure Matters
Hand sizes vary, and a racing glove performs as intended when the knuckle shells and sliders sit over the joints they are meant to cover. Leather Collection makes gloves to order, so sizing can follow the rider's hand and avoid long thumbs or tight pressure points.
Updated: October 2026
Frequently Asked Questions
Are these gloves the ones Valentino Rossi wore?
No. They are replica gloves inspired by the design Rossi used in the 2019 MotoGP season. They are unconnected to Rossi or any team, and the name is used only to describe the design they follow. Anyone comparing options should treat the product as a replica design rather than as equipment used by the rider.
What does EN 13594 mean for motorcycle gloves?
EN 13594 is the European standard for protective motorcycle gloves. It tests properties such as seam strength, abrasion, cut and tear resistance and how well the glove stays on the hand. A glove meets it only if it carries the marking, and the product page for these gloves states no EN 13594 level.
Why are racing gloves made from cowhide and goatskin?
Cowhide offers strong abrasion resistance for the main body, while goatskin is thinner and gives more feel on the palm. Combining them lets a glove protect in a slide without losing control of the throttle and brake lever. This split of materials is common across racing gloves.
Can the gloves be made to a rider's hand size?
Yes. Leather Collection makes gloves to order, so the fit can be matched to the rider's hand. This helps the knuckle protectors and palm sliders sit over the right joints and avoids pressure points. This is especially useful for riders whose proportions fall between standard sizes.
Written by the Leather Collection Editorial Team.
