SKU
MLJ-1392-EN

Black Biker Style Leather Jacket Men Bikers Fashion Cowhide

Special Price $183.20 Regular Price $229.00
Save 20%
Select your preferred options below to personalize your order.

Check our Size Chart to find your right size.

Made to order
Made to Order Made after you order
Free Worldwide Shipping On orders over $699.00 USD

Continue to secure checkout

Share this

This biker style jacket for men is cut from black cowhide, with vents on the chest and back. It is hand-stitched and made to order.

  • 1.2-1.3 mm natural cowhide with a smooth satin lining.
  • YKK zippers, heavy snaps and a buckle in a silver brass finish.
  • Choose no lining, regular lining or a sublimated lining with your own design.

Mens Black Biker Jacket

Outer Layer

  • The biker style shell is soft, smooth natural cowhide, 1.2-1.3 mm thick.
  • Epaulets, a front buckle and a half belt give it a classic biker look.
  • The buckle and hardware have a silver brass finish.
  • Two side pockets and a flap coin pocket sit on the outside.
  • Two chest vents and a full-width back vent let air in. A heavy mesh liner sits behind them.
  • An action back and stretch panels in the arms help you move.
  • YKK zippers and heavy snaps close the jacket.
  • Reinforced stitching holds the seams.

Inner Layer

  • A satin lining feels smooth when you slip the jacket on.
  • Inside, there is one snap patch pocket and one zipper pocket.

Leather Jacket Customization & Options

  • Lining: Choose No Lining, Regular Lining or Sublimated Lining.
  • Your Design: With a sublimated lining, you can upload your own artwork for the inside.
  • Custom Size: Pick Custom Size and place your order. Then send your sizes with the measurement form. This turns it into a tailored leather jacket for men.
  • Leather Collection has made leather gear since 2009. Each jacket is hand-stitched and made to order.
  • For jackets made for the road, see the men's leather motorcycle jackets .
  1. Classic Motorcycle Leather Jacket for Men
    Classic Motorcycle Leather Jacket for Men
  2. mens black biker jacket
    mens black biker jacket
  3. tailored leather jacket for men
    tailored leather jacket for men
  4. Classic Motorcycle Leather Jacket for Men
    Classic Motorcycle Leather Jacket for Men

Product Specifications

  • Product Type: Jacket (Bikers Fashion)
  • Category: Men's Biker Leather Jackets
  • Intended Use: Everyday wear and casual outings
  • Material: 1.2-1.3 mm natural cowhide leather
  • Lining: Satin; No Lining, Regular Lining or Sublimated Lining at order
  • Construction: Hand-stitched, made to order; reinforced stitching; action back with stretch panels; epaulets; half belt
  • Ventilation: 2 chest vents; full-width back vent with a heavy mesh liner
  • Closure / Fit System: YKK zippers and heavy snaps; front buckle; silver brass finish
  • Pockets: Outside: 2 side pockets, 1 flap coin pocket. Inside: 1 snap patch pocket, 1 zipper pocket
  • Style / Design Features: Black; classic biker cut with epaulets, a front buckle and a half belt
  • Sizes: Men EU 42-60 (US 32-50); Custom Size
  • Made-to-Measure: Yes, with the Custom Size option and the measurement form
  • Brand: Leather Collection

FREQUENTLY ASKED QUESTIONS

The shell is natural cowhide, 1.2 to 1.3 mm thick. It feels soft and smooth, and it is black. The lining is satin. The zippers are YKK, and the buckle and hardware have a silver brass finish. Each jacket is hand-stitched and made to order. To see riding cuts as well, browse the leather motorcycle jackets .
There are two vents on the chest and one wide vent across the back. When you open them, air can flow through the jacket. A heavy mesh liner sits behind the vents, so the inside stays covered. The action back and stretch panels in the arms also help when you reach or lean. Close the vents on cold days to keep the wind out.
Yes. When you order, pick No Lining, Regular Lining or Sublimated Lining. No lining keeps the jacket light. Regular lining gives a smooth satin feel. With a sublimated lining, you can upload your own picture or pattern, and it is printed inside the jacket. It is a simple way to make the jacket your own.
Here is how it works. Select Custom Size in the Size options on the product page. Then complete checkout. You will get an order number. Use the measurement form to enter that number with your body measurements. Useful measurements here are your chest girth, waist, hip, sleeve length and height. Check the size chart if you are not sure you need a custom size.
Wipe the jacket with a soft, dry cloth after you wear it. If it gets wet, let it dry on a wide hanger, away from heat. Do not use a hair dryer. Use a leather conditioner a few times a year to keep the hide soft. Store the jacket in a cool, dry place. The leather care instructions give more tips.