SKU
MGR-AG4200009-EN

Anthony Gobert AMA Racing Suit Ducati 2003

Special Price $639.20 Regular Price $799.00
Save 20%
Select your preferred options below to personalize your order.

Check our Size Chart to find your right size.

Made to Order Made after you order
Free Worldwide Shipping On orders over $699.00

Continue to secure checkout

Share

This Anthony Gobert motorcycle racing suit is a black design inspired by his Ducati AMA leathers of 2003. Each suit is hand-stitched to order from 1.2-1.3 mm drum-dyed, milled cowhide, with removable CE Level 1 armor, a back pocket for an optional EN 1621-2 back protector and TPU-reinforced metal protectors outside.

  • Black cowhide, 1.2-1.3 mm
  • TPU-reinforced metal protectors at shoulders and knees
  • Removable CE Level 1 armor, back protector pocket
  • Suit, jacket only or pants only

Anthony Gobert Black Ducati Race Suit, 2003

Look and layers

Gobert's 2003 Ducati AMA leathers were black, and this suit follows that tone. It is our own design inspired by his look and is not made or endorsed by the team, the rider or the manufacturer. Extra leather covers the shoulders, elbows, knees and hips.

Outside protection

This suit carries more hardware than most of the range. TPU-reinforced metal protectors sit on the outside of the shoulders and knees, TPU elbow sliders take the wear in a lean, and replaceable TPU knee sliders attach by Velcro. Foam pads at the elbows and knees add a soft layer, and the seams use double and triple stitching where the stress is highest.

Compared with the other Gobert suits

The 1998-1999 red Ducati suit and the 2002 Yamaha suit are different colors from the same rider. See the whole group in Ducati racing suits.

Sizes are listed in the size chart; a Custom Size is available too.

  1. Anthony Gobert Austin Ducati Racing Suit 2003 AMA
    Anthony Gobert Austin Ducati Racing Suit 2003 AMA
  2. ducati ama race suit 2003
    ducati ama race suit 2003
  3. black ducati leather race suit
    black ducati leather race suit
  4. Anthony Gobert Austin Ducati Racing Suit 2003 AMA
    Anthony Gobert Austin Ducati Racing Suit 2003 AMA

Product Specifications

  • Product Type: Race suit: 1-piece, 2-piece, jacket only or pants only
  • Material: Cowhide, 1.2-1.3 mm; Monaco or kangaroo leather as paid upgrades
  • Leather Finish: Top-grain, drum-dyed, milled
  • Lining: Breathable mesh; removable or thermal removable lining as add-ons
  • Construction: Hand-stitched; double and triple stitching; accordion panels at lower back and knees; stretch Cordura at sleeves, crotch and calves; pre-curved sleeves; neoprene cuffs and collar; black
  • Closures: YKK semi auto-lock coil zippers at front, cuffs and calves; Velcro straps at neck, cuffs and calves; snap buttons on 2-piece pants
  • Pockets: 1 inside mesh chest pocket, left side
  • Protection: Removable CE Level 1 armor (EN 1621-1) at the shoulders, elbows, knees and hips; CE Level 2 is a paid upgrade. Back pocket for an optional EN 1621-2 back protector. Replaceable TPU knee sliders; TPU-reinforced metal protectors at the shoulders and knees; TPU elbow sliders
  • Options: Speed hump (none, standard, ventilated, hydro); perforation (none, chest, front, full); extra knee slider; matching gloves and boots
  • Sizes: Men's EU 42-60 (US 32-50); women's EU 38-52 (US 6-20)
  • Made to Measure: Yes: Custom Size, with measurements sent after the order
  • Category: Vintage AMA race suits
  • Related: Anthony Gobert Vance & Hines Ducati Leathers 1998 - 1999 AMA

FREQUENTLY ASKED QUESTIONS

The shell is black cowhide, 1.2-1.3 mm thick, drum-dyed and milled. Monaco or kangaroo leather are paid upgrades, and the lining is a breathable mesh.
Select Custom Size in the Size options and complete checkout. Then send your measurements through the measurement form with your order number. Ask someone else to take them, over thin clothing.
The CE Level 1 armor (EN 1621-1) at the shoulders, elbows, knees and hips is removable. CE Level 2 is a paid upgrade.
Yes. Choose none, standard, ventilated or hydro under the Speed Hump option. For more airflow you can also add chest, front or full perforation in the options.