The Silverstone motorcycle race boots come in black and red cowhide. Each pair is hand-stitched and made to order for men and women.
- 1.2-1.5 mm cowhide with a laminated finish
- TPU shin and ankle guards, plus a reinforced heel and toe
- Replaceable TPU toe sliders and a slip-resistant, oil-resistant sole
Silverstone Boots: Build and Details
These motorcycle race boots pair black and red cowhide with TPU guards. Leather Collection has made leather gear since 2009. Each pair is cut and hand-stitched after you order. To compare other pairs, see all the leather motorcycle boots in the range.
Outer Layer
- The upper is 1.2-1.5 mm cowhide with a laminated finish.
- TPU guards cover the shin and the ankle.
- The heel and the toe have reinforced protectors.
- A heavy-duty pad sits on the gear shifter side.
- Replaceable TPU toe sliders take the wear in a deep lean.
- Air vents at the shin let air flow in.
- The rubber sole is slip-resistant and oil-resistant.
- A YKK coil zipper opens and closes each boot.
Inner Layer
- A breathable micro mesh lining helps keep your feet cool.
Sizes and Colors
- Sizes run from EU 36 to EU 46 (US 4.5 to US 12) for men and women.
- Color: black with red.
- Add any notes for your pair in the Order Instructions box.

Silverstone Black Biker Boots 
black and red race boots 
cowhide motorcycle boots 
Silverstone Black Biker Boots
Product Specifications
- Product Type: Motorcycle Race Boots
- Category: Motorcycle, Footwear
- Intended Use: Track days, street riding and touring
- Material: 1.2-1.5 mm cowhide leather with a laminated finish
- Construction: Hand-stitched and made to order; reinforced heel and toe
- Lining: Breathable micro mesh
- Ventilation: Air vents at the shin
- Closure / Fit System: YKK coil zipper
- Protection: TPU shin protector; TPU ankle protector; reinforced heel and toe protectors; replaceable TPU toe sliders; heavy-duty gear shifter pad
- Sole: Slip-resistant and oil-resistant rubber sole
- Colors: Black, Red
- Sizes: EU 36 to EU 46 (US 4.5 to US 12), men and women
- Ideal For: Riders who want leather race boots with TPU guards for the track and the street
- Brand: Leather Collection
FREQUENTLY ASKED QUESTIONS
TPU guards sit over the shin and the ankle. TPU is a hard plastic that spreads the force of a hit over a wider area. The heel and the toe have reinforced protectors too. A heavy-duty pad covers the spot where your foot works the gear shifter, so the leather there does not wear thin. The sole is slip-resistant and oil-resistant. These parts add protection, but no boot can stop every injury.
A laminated finish is a thin layer bonded to the face of the leather. It gives the cowhide a smooth, even look in black and red. It also makes the surface easy to wipe clean after a ride. Under that face, the cowhide is 1.2-1.5 mm thick. That is thick enough to hold the TPU guards in place and still let your ankle bend when you walk or shift gears.
Sizes run from EU 36 to EU 46, which is US 4.5 to US 12. Measure both feet at the end of the day, when they are at their largest. Then use the bigger number and compare it with the size chart. Race boots should hold your foot firmly with no pressure across the top. If you sit between two sizes, add a note in the Order Instructions box.
Yes. The Silverstone boots are made for men and women. The size range starts at US 4.5 (EU 36), so smaller feet are covered. The fit and the protection are the same for every size. The TPU guards, the toe sliders and the shifter pad come on every pair. Use the size chart to match your foot length, and add any fit notes when you order.
After each ride, wipe off road dirt with a damp cloth. Let the boots dry at room temperature, away from heaters or direct sun. Clean the leather with a mild leather cleaner from time to time, then add a conditioner so it stays soft. Check the toe sliders and swap them when they look thin. Store the boots in a cool, dry place. For more tips, read the leather care instructions.
Related Products
Check items to add to the cart or





