The Pistol Pete jacket is a men's brown biker jacket in 1.2-1.3 mm cowhide with a naked finish. Zipper vents on the front and back let air in on warm days.
- Antique brass YKK zippers and snaps
- Two chest flap pockets and two side zipper pockets
- Inside snap pocket and gun pocket
Brown Biker Jacket With Zipper Vents
The Pistol Pete jacket is a brown biker style jacket for men. It is cut from 1.2 to 1.3 mm cowhide with a naked finish. Naked leather has little coating, so it softens and darkens with wear. Leather Collection has made leather gear since 2009.
Outer Layer
- Two 14-inch zipper vents on the front, built into the pocket design.
- Two 14-inch vertical vents on the back, backed with heavy mesh.
- YKK zippers with an antique brass finish.
- Antique brass snap buttons.
- Buckled side tabs to adjust the waist.
- Action back for an easier reach.
- Hand-stitched and made to order.
Inner Layer
- Satin lining as standard.
- One snap patch pocket and one gun pocket inside.
Pocket Layout
- Two chest flap pockets and two side zipper pockets.
Sizes and Lining Options
- Choose no lining, regular lining or sublimated lining.
- With sublimated lining, you can upload your own design for the inside.
- Men's sizes run from EU 42 to EU 60 (US 32 to US 50).
- Custom Size is also offered. Send your numbers on the measurement form after you order.
- Browse more mens leather motorcycle jackets .
-
Pistol Pete Men's Leather Jacket -
pistol pete leather jacket -
brown leather motorcycle jacket men -
Pistol Pete Men's Leather Jacket
Product Specifications
- Product Type: Biker style jacket
- Category: Men's leather motorcycle jackets
- Intended Use: Everyday wear and casual rides
- Material: 1.2-1.3 mm cowhide, naked finish
- Construction: Hand-stitched; made to order; action back; buckled side tabs
- Ventilation: Two 14-inch front zipper vents; two 14-inch back vents with mesh
- Closure / Fit System: YKK zippers with antique brass finish; antique brass snap buttons
- Pockets: 4 outside (2 chest flap, 2 side zipper); 2 inside (1 snap patch, 1 gun pocket)
- Lining Options: No lining, regular lining, or sublimated lining with your own design
- Color: Brown
- Sizes: Men EU 42 to EU 60 (US 32 to US 50)
- Made-to-Measure: Yes, with the Custom Size option
- Brand: Leather Collection
FREQUENTLY ASKED QUESTIONS
A naked finish means the cowhide has very little coating on top. You can see and feel the natural grain. The leather is soft from the start. Over time it darkens and builds a patina, which is a soft shine from wear. Small marks and color shifts are normal for naked leather. Condition it now and then so it does not dry out. See the leather care instructions for tips.
The jacket has two 14-inch zipper vents on the front and two on the back. Open them to let air flow through on warm days. Close them when it gets cool. The front vents are built into the pocket design. The back vents have heavy mesh behind them, so air gets in while the inside stays covered. This makes the jacket easy to wear in more seasons.
Yes. You can order the jacket with no lining, a regular lining, or a sublimated lining. Sublimated means a printed design is set into the fabric. If you choose it, you can upload your own design when you order. It can be a pattern, your initials or art you own. No lining makes the jacket lighter for warm weather.
Standard men's sizes run from EU 42 to EU 60, or US 32 to US 50. Measure your chest around the fullest part. Then check the size chart. The buckled side tabs let you adjust the waist a little. If you fall between sizes, choose Custom Size and send your measurements after you order. For more styles, see other
leather motorcycle jackets
.