Canada 
Brazil 
Germany 
France 
Italy 
Switzerland 
Sweden 
Spain 
Great Britain 
Norway 
Russia 
South Africa 
Japan 
New Zealand 
Australia 
The Crescent leather motorcycle gloves are cut from black and red cowhide. An aramid Kevlar lining sits inside.
- Cowhide leather, 0.8-0.9 mm thick.
- Pre-curved palm and fingers that follow your grip on the bars.
- Rubber knuckle guard with air vents, and a Velcro wrist strap.
Crescent Leather Riding Gloves
- These leather motorcycle gloves use cowhide that is 0.8-0.9 mm thick, in black and red.
- An aramid Kevlar lining runs inside the leather shell.
- Extra leather sits between the thumb and index finger, where the grip rubs the most.
- A rubber knuckle guard has air intakes and an exhaust port to let air reach your hand.
- Sliders on poly-foam pads cover the palm, thumb and fingers.
- The palm and fingers are pre-curved, so the gloves rest in a riding grip.
- Flexible knuckle panels let your hand open and close with ease.
- A Velcro strap at the wrist and a Velcro cuff keep the gloves in place.
- The seams are stitched with strong nylon thread.
Sizes & Related Gloves
- Sizes run from XS to 3XL and fit both men and women. Check the size chart before you order.
- Leather Collection has made leather gear since 2009. Each pair is hand-stitched to order.
- Browse more in other colors.
- Want a grey pair? See the .
Crescent leather motorcycle gloves 
leather riding gloves cowhide motorcycle gloves Crescent leather motorcycle gloves
Product Specifications
- Product Type: Gloves
- Category: Motorcycle, Gloves
- Intended Use: Street riding and everyday wear
- Material: Cowhide leather (0.8-0.9 mm), plain finish
- Lining: Aramid Kevlar
- Construction: Hand-stitched with nylon thread; extra leather between thumb and index finger; pre-curved palm and fingers
- Protection Features: Rubber knuckle guard with air intakes; sliders on poly-foam at palm, thumb and fingers; flexible knuckles
- Closure: Velcro wrist strap and Velcro cuff
- Colors: Black, Red
- Sizing: XS, S, M, L, XL, 2XL, 3XL (men and women)
- Brand: Leather Collection
FREQUENTLY ASKED QUESTIONS
Yes. The sizes run from XS to 3XL, and the cut works for both men and women. To find your size, wrap a soft tape around your hand at the knuckles, without the thumb. Then measure from the wrist crease to the tip of your middle finger. Compare both numbers with the glove size chart.
Aramid is a strong man-made fiber. Kevlar is a well-known type of it. It is often used in riding gear because it resists cuts and heat better than plain fabric. In these gloves it sits under the cowhide as a second layer. It is thin, so the gloves still bend at the fingers. The lining adds strength, but no glove can stop every injury, so ride with care.
When you hold the bars, your fingers curl. Flat gloves bunch up in that spot and can rub. These gloves are sewn with a bend already in the palm and fingers. That means less pull on the leather when you grip, and less stiffness in the hand on long rides. The flexible knuckle panels help too, since they let the back of the hand stretch as you close your fist.
Wipe off dirt and bugs with a damp, soft cloth after a ride. Let the gloves dry at room heat, never on a heater or in strong sun, since heat can crack cowhide. When the leather starts to feel dry, rub in a small amount of leather conditioner and buff it off. Store the gloves in a cool, dry place. Read the leather care guide for more tips.
Related Products
Check items to add to the cart or
