Canada 
Brazil 
Germany 
France 
Italy 
Switzerland 
Sweden 
Spain 
Great Britain 
Norway 
Russia 
South Africa 
Japan 
New Zealand 
Australia 
Red & White Cowhide Leather Moto Gloves TPU Knuckle Protection
Special Price
$208.00
Regular Price
$260.00
These red & white leather moto gloves are cut from 0.8-0.9 mm cowhide. Each pair is hand-stitched and made to order.
- A TPU knuckle guard and TPU sliders on the palm, thumb and fingers.
- Pre-curved fingers and an extra layer at the thumb and index finger.
- An aramid Kevlar lining and Velcro wrist and cuff closures.
Red & White Leather Moto Glove Features
- The red & white leather moto gloves use 0.8-0.9 mm cowhide that resists scuffs and tears.
- An extra layer between the thumb and index finger stands up to grip wear.
- A TPU knuckle guard has air intakes and an exhaust port to let heat out.
- TPU sliders sit on foam at the palm, thumb and fingers.
- The palm and fingers are pre-curved to lower hand strain on long rides.
- Flexible knuckles let your fingers move freely.
- A Velcro wrist strap and a Velcro cuff keep the glove on.
- Seams are safety-stitched with nylon thread.
- The inside has an aramid Kevlar lining.
Sizing & Related Gear
- Sizes run from XS to 3XL for men and women. Check the size chart first.
- Leather Collection has made leather gear since 2009.
- For a brighter color, see the .
Red and White Gloves Moto Leather 
red and white motorcycle gloves tpu knuckle protector gloves Red and White Gloves Moto Leather
Product Specifications
- Product Type: Motorcycle Gloves
- Category: Gloves, Motorcycle
- Intended Use: Track riding, commuting, daily motorcycle use
- Material: Cowhide leather (0.8-0.9 mm)
- Lining: Aramid Kevlar lining
- Construction: Hand-stitched, made to order; extra layer at the thumb and index finger; pre-curved design; safety-stitched nylon thread
- Comfort Features: Pre-curved palm and fingers; flexible knuckles; adjustable Velcro cuff
- Closure / Fit System: Velcro wrist strap; Velcro cuff closure
- Protection: TPU knuckle protector with air intakes; TPU sliders at palm, thumb and fingers
- Style / Design Features: Red and White; race-style design
- Sizes: XS, S, M, L, XL, 2XL, 3XL
- Brand: Leather Collection
- Explore Related Gear: Browse more .
FREQUENTLY ASKED QUESTIONS
The gloves are made from cowhide that is 0.8 to 0.9 mm thick. This weight bends easily, so you can feel the grip and controls. It is still strong enough to resist scuffs and tears in a slide. The seams are hand-stitched with nylon thread. An extra layer at the thumb and index finger adds strength where the glove wears most. The inside has an aramid Kevlar lining.
TPU is a tough, slightly flexible plastic. The knuckle guard spreads the force of a hit over a wider area. This lowers the pressure on the bones of your hand. The guard also has air intakes and an exhaust port, so heat can escape. TPU sliders on foam cover the palm, thumb and fingers too. Together they cover the spots that touch the ground first in a fall.
The gloves come in XS, S, M, L, XL, 2XL and 3XL. Measure around your hand at the knuckles, with your fingers together. Then measure from your wrist to the tip of your middle finger. Match both numbers to the size chart. The fingers are pre-curved for a closed grip. So the gloves feel right once your hand is on the bars.
Yes, for many rides. The 0.8 to 0.9 mm cowhide is thinner than suit leather, so it stays more comfortable. The knuckle guard has air intakes and an exhaust port that let heat out. Leather still breathes less than mesh. On very hot days, loosen the Velcro cuff a little for more air. Wipe the gloves dry after a sweaty ride and follow the leather care instructions.