Canada 
Brazil 
Germany 
France 
Italy 
Switzerland 
Sweden 
Spain 
Great Britain 
Norway 
Russia 
South Africa 
Japan 
New Zealand 
Australia 
These BMW motorcycle gloves use a black, blue, red and white design inspired by BMW racing. They are hand-stitched from cowhide and made to order.
- 0.8-0.9 mm cowhide with an aramid (Kevlar) lining
- TPU knuckle protector
- Pre-curved palm and fingers
BMW Motorcycle Gloves Specifications & Construction Details
Outer Layer
- 0.8-0.9 mm cowhide leather with a plain finish.
- Extra leather between the thumb and index finger adds strength.
- A flexible TPU protector covers the knuckles.
- TPU sliders sit on poly-foam on the palm, thumb and fingers.
- Rubber protectors with air vents help keep your hands cool.
Inner Layer
- An aramid (Kevlar) lining adds a strong layer inside.
- The palm and fingers are pre-curved to match a hand on the grips.
- A Velcro wrist strap and a Velcro cuff hold each glove in place.
- The seams are stitched with strong nylon thread.
- Leather Collection has made leather gear since 2009. Each pair is hand-stitched and made to order.
More Race Gloves
- See more in the range.
- Compare the or the .
BMW Best All Round Motorcycle Gloves bmw gloves bmw motorrad gloves BMW Best All Round Motorcycle Gloves
Product Specifications
- Product Type: Motorcycle racing gloves
- Category: MotoGP Racing Gloves
- Intended Use: Track days and road riding
- Material: 0.8-0.9 mm cowhide leather, plain finish
- Lining: Aramid (Kevlar) lining
- Construction: Hand-stitched and made to order; extra leather at the thumb and index finger; high-strength nylon thread
- Comfort Features: Pre-curved palm and fingers; rubber protectors with air vents
- Closure / Fit System: Velcro wrist strap and Velcro cuff closure
- Protection: TPU knuckle protector; TPU sliders on the palm, thumb and fingers
- Style / Design Features: Black, blue, red and white design inspired by BMW racing
- Sizes: XS to 3XL, for men and women
- Brand: Leather Collection
- Explore Related Gear: Browse BMW Motorcycle Suit.
FREQUENTLY ASKED QUESTIONS
TPU is a tough, bendy plastic. The protector sits over your knuckles, the part of the hand that often hits first in a fall. It bends as you grip, so it does not dig in on a long ride. TPU sliders on the palm, thumb and fingers add more cover. They help the glove slide instead of grab. A Velcro strap and cuff keep each glove on your wrist.
Your hand is bent when it holds the grips. These gloves are shaped in that bent position. The leather does not pull against your fingers, so your hands tire less on a long ride. It also helps you work the throttle and brake with less effort. Extra leather between the thumb and index finger adds strength where the grip wears most. Other leather motorcycle gloves share this shape.
Gloves need to be thinner than a jacket or suit so you can feel the levers. Cowhide at 0.8-0.9 mm is a good middle ground. It is tough enough for track days and thin enough to move with your fingers. The aramid (Kevlar) lining adds one more strong layer inside. The plain finish shows off the black, blue, red and white colors. Each pair is cut and stitched by hand after you order.
Measure around your hand at the knuckles, without the thumb. Then check the number against the glove size chart. Sizes run from XS to 3XL for men and women. Race gloves should feel close, with no loose leather at the fingertips. More styles are in the
range.
Wipe the gloves with a soft, dry cloth after each ride. Let them dry at room temperature, away from heaters and direct sun. Every few months, rub in a little leather conditioner, then buff. Store them flat or on a wide hanger in a cloth bag, not plastic. Never machine wash them. For more tips, read the leather care instructions or visit the customer service page.
Related Products
Check items to add to the cart or
